Compliance checklist

PARTS KIT,BALL VALV · N00104-26-Q-FE42. 203 requirement sentences found in the notice and 3 attachments: every "shall", "must" and "required", quoted as written and sorted into submission requirements (8) and performance / contract clauses (195). Nothing is generated.

Pro

The full checklist is a Pro feature

203 requirement sentences on this RFP. Pro shows every one, grouped by section, with a CSV export, for $39/mo. Below is a preview.

Submission requirements · 8

N0010426QFE42.pdf · Page 7 · 1

ECPs must be prepared in Contractor format, and must include the following information: (also in notice)

N0010426QFE42.pdf · Page 8 · 2

Certification must include the contractor's name, address and date, quantity inspected, identified to the contract/purchase order and item number, and the Contractor's or authorized personnel's signature. (also in notice)
Welding procedures and qualification data must be submitted in a commercially available electronic format such as Adobe Acrobat PDF. (also in notice)

Performance / contract clauses · 195

Notice · 2

The Contractor must maintain traceability of these markings to each unit throughout refurbishment. 3.1.2 IDENTIFYING MARKINGS - Part must have a MIC (Material Identification a and Control) code, heat/heat lot code, or unique Contractor traceability number/code that is visible on the part.
Performance - Per applicable fabrication specification Acceptance - Per applicable fabrication specification 3.4 ;Seats are to be manufactured and must meet the drawing stack height requirement when mated with the refurbished ball.; 3.5 Seat Stack Height Measurement - To ensure that each seat is within tolerance, check each seat individually by measuring the seat height with the ball resting on the seat.

N0010426QFE42.pdf · NAVSUP WEAPONS SYSTEMS SUPPORT · 1

A beyond repair (BR)/ beyond economic repair (BER) price shall also be provided in addition to the repair price at time submission of quote. (also in notice)

Extracted from the notice text and attachments as published. The solicitation governs; read Sections L and M in full before you submit.