Compliance checklist

DRAIN STR/ORIFICE · N00104-26-Q-FF70. 128 requirement sentences found in the notice and 2 attachments: every "shall", "must" and "required", quoted as written and sorted into submission requirements (8) and performance / contract clauses (120). Nothing is generated.

Pro

The full checklist is a Pro feature

128 requirement sentences on this RFP. Pro shows every one, grouped by section, with a CSV export, for $39/mo. Below is a preview.

Submission requirements · 8

N0010426QFF70.pdf · Page 7 · 1

The certification statement must be signed by the heat-treater and include the date of heat treatment, duration and temperature of heat treatment operations and quenching medium (if required). 3.11 Component Identification Description (CID) - When applicable drawing(s) and/or specification(s) specify that a nameplate or identification plate is required, the CID number ( <CID 759997120X> ) must be added. (also in notice)

N0010426QFF70.pdf · Page 8 · 2

ECPs must be prepared in Contractor format, and must include the following information: a. (also in notice)
Certification must include the contractor's name, address and date, quantity inspected, identified to the contract/purchase order and item number, and the Contractor's or authorized personnel's signature. (also in notice)

Performance / contract clauses · 120

Notice · 2

Material - ;MIL-DTL-1222, Grade 2H or 7, Type III (to be phosphate coated or zinc plated IAW Note 4.C); 3.4 Testing Certification - Certifications are required for the following tests on the items listed below.
Sampling must be per MIL-DTL-1222 Acceptance - MIL-DTL-1222 Test - ;Visual and Dye Penetrant Inspection (final layer);

N0010426QFF70.pdf · CONTACT INFORMATION · 1

When a DCMA office is shown on a Contract/Purchase Order, the Administrative Contracting Officer (ACO) is the primary point of contact and all inquiries shall initially be directed to that office for necessary action.

Extracted from the notice text and attachments as published. The solicitation governs; read Sections L and M in full before you submit.