Compliance checklist

USCG - Response Boat, Small Third Generation (RB-S III) · USCG-RB-S-III-2026. 195 requirement sentences found in the notice and 6 attachments: every "shall", "must" and "required", quoted as written and sorted into submission requirements (6) and performance / contract clauses (189). Nothing is generated.

Pro

The full checklist is a Pro feature

195 requirement sentences on this RFP. Pro shows every one, grouped by section, with a CSV export, for $39/mo. Below is a preview.

Submission requirements · 6

1. SOW_RB-S_III_Draft.pdf · BALTIMORE, MD 21226 · 2

083-6 [Orig] Provisioning Data Requirements 083-6.1 [Orig] The Contractor shall provide provisioning data—including copies of purchase orders and purchase order specifications—for each end item, component, assembly, and support item that can be disassembled, reassembled, or replaced and that collectively constitutes the item.
The Contractor shall provide and display a valid, appropriate license plate or transit tag for any over-the-road transport. 085 [ORIG] TECHNICAL DATA PACKAGE (TDP) REQUIREMENTS 085-1 [Orig] General 085-1.1 [Orig] The Contractor shall prepare and deliver a Technical Data Package (TDP) that fully describes the boat's design, construction, and system configurations.

1. SOW_RB-S_III_Draft.pdf · COMDTINST 9085.1; and · 2

085-3.1.4 [Orig] RB-S III 2D Product Drawing TDP Option Selection Worksheet (C-2) - GFI 085-3.2 [Orig] The Contractor shall deliver a complete set of 2D Product Drawings organized into the drawing packages.
Material Lists shall include the data fields required by the RB-S III 2D Product Drawing TDP Option Selection Worksheet, Section C Attachment C- 2, and shall be sufficient to allow direct ordering and configuration management. 085-3.4 [Orig] 2D Product Drawings shall represent the entire RB‑S III fleet.

Performance / contract clauses · 189

Specifications_RB-S_III_Draft_10SEP26.pdf · RECORD OF CONTRACT CHANGES · 2

It shall exit turns smoothly without requiring excessive steering force. 051-3.3 [Orig] The RB-S III shall maneuver straight in reverse and perform backing turns to port and starboard without deck or cockpit flooding.
Seating shall include: 070-3.2.1 [Orig] Four full isolation, shock-mitigating seats in a two-by-two forward-facing configuration within the cabin. 070-3.2.2 [Orig] An exterior fold-down seat facing aft, mounted on the cabin’s aft bulkhead, with a clear sightline to the aft tow post. 070-3.3 [Orig] The RB-S III cabin seating and deck arrangements shall provide firing arcs as indicated in Figure 070-1.

Specifications_RB-S_III_Draft_10SEP26.pdf · A240/A240M S32205 duplex stainless steel may b · 2

078-4 [Orig] Flotation Material 078-4.1 [Orig] Flotation material shall be closed-cell resilient foam compliant with 33 CFR 183.114 and flammability requirements of 49 CFR 571.302.
Graphite (lead) pencils shall not be used to mark uncoated aluminum.

Extracted from the notice text and attachments as published. The solicitation governs; read Sections L and M in full before you submit.